1 6

Ride Nook

LISEN Qi2.2 25W MagSafe Car Mount Charger, Magnetic Wireless Car Charger

LISEN Qi2.2 25W MagSafe Car Mount Charger, Magnetic Wireless Car Charger

$39.99 USD
$63.98 USD $39.99 USD
Sale Sold out
Shipping calculated at checkout.

From the brand

  2. Supported phone models (charging)

    Only For iPhone

    For iPhone 16+（IOS26）: Up to Qi2.2 25W

    For iPhone 12–15: Up to Qi2 15W

    For iPhone 16e：Up to 7.5W

    Condition: Temperature of 26 ° C and connected to a power supply of PD36W or higher

    Suction cup falls off

    1.Clean the mounting area: no oil/water stains.

    2.Best on flat surfaces; avoid strong curves, genuine leather, perforated leather.

    3.After repositioning, rinse suction pad with clean water (keep water away from phone contact area). Let it sit 24h before use.

  3. Charging disconnects / Unstable charging

    1.Metal in the case may trigger FOD.

    2.Use a PD 36W+ adapter

    3.remove the case and retry.

    Slow charging?

    1.Use 36W+ PD Port.

    2. Thick/metal cases (>2mm) may block fast mode;

    3.70–80%+ battery may drop to 7.5W (normal).

    4. Remove case/metal, cool 5 min, confirm fast wireless support.

  4. Gets warm/hot?

    1.Surface temp <45°C is normal. If >45°C, the product may reduce power until it cools.

    2.Avoid mounting directly on a hot air vent (especially in winter heating).

    Weak magnet or Phone falls

    1.If using a magnetic ring/plate, check installation direction; test without case.

    2.Many non-iPhone models lack built-in magnetic alignment; use a compatible magnetic/MagSafe case for stability.

    Not charging / No power

    1.Use PD36W+ (not 5V/laptop USB).

    2.Remove metal case/objects (FOD) and test without the case.

  5. magnetic phone holder for car
  6. iPhone Air Car Charger
  7. iPhone 17 accessories
  8. iPhone 17 Charger Fast Charging
  9. LISEN

Product description

1
1

  • Please make sure your dashboard is not made of fabric, wood, leather, or very rough surfaces. It also requires a flat, smooth, non-angled area with at least a 68mm (about baseball-size) diameter, with no gaps or seams, for secure installation.

  • Made Only for iPhone 12 and later. iPhone 12 - 15 supports up to 15W;iPhone 16 and later up to 25W after software update (except iPhone 16e). For secure magnetic hold, use a MagSafe case or one no thicker than 2.5 mm; avoid non-magnetic cases.

  • This product requires a rated input power of PD 36W or higher. Use the included cigarette lighter adapter and cable to ensure safe and efficient charging

  • Your setup must meet the following:

    1. iPhone 16 series or later running iOS 26 or later (as required).

    2. Powered by the original or a single-port 36W (or higher) car charger.

    3. Either no case or an Apple MagSafe case no thicker than 2.5 mim.

  • 1.Avoid using the product under direct sunlight or extremely high cabin temperatures whenever possible.

    2.If suction weakens, rinse and air-dry before reuse.

    3.Slight heat is normal during use, especially with fast wireless charging.

View full details